GetResizer
Home / Guides / Image Resolution, PPI and DPI: What Actually Changes the Print Size

Image Resolution, PPI and DPI: What Actually Changes the Print Size

Pixels are fixed; PPI and DPI only describe density. How print size is calculated, why changing DPI adds no detail, and what to set.

Resolution questions usually start with a wrong premise: that raising the DPI number makes an image sharper. It does not. DPI and PPI are descriptions of density, not amounts of detail. The only fixed quantity in a raster image is the pixel grid, and every print size is derived from it.

Once that is clear, most decisions become arithmetic: choose the physical size, choose a density appropriate to viewing distance, and resize the pixels to match.

Three numbers people mix up

  • Pixels: the width and height of the actual grid, such as 3000 × 2000. This is the real information in the file.
  • PPI (pixels per inch): how densely those pixels are packed when displayed or printed. It is a property of the output, not of the file alone.
  • DPI (dots per inch): a printer's dot placement, often used loosely as a synonym for PPI. In everyday image work, the terms are interchangeable.

How print size is calculated

Print size in inches equals pixels divided by PPI. A 3000-pixel-wide image printed at 300 PPI is 10 inches wide. The same file at 150 PPI is 20 inches wide — larger, but each inch carries half as many pixels.

  • 3000 px at 300 PPI = 10 inches.
  • 3000 px at 150 PPI = 20 inches.
  • 1200 px at 300 PPI = 4 inches.
  • To find the pixels you need: target inches × PPI. A 6 × 4 inch print at 300 PPI needs 1800 × 1200 pixels.

Changing DPI does not add detail

Editing the DPI field in an image's metadata changes how software interprets the grid, not the grid itself. Set a 1200-pixel image to 300 DPI and it will be described as 4 inches wide; set it to 72 DPI and the same pixels are described as about 16.7 inches wide. Nothing was sharpened, and no pixels were added.

Resampling is different: it changes the pixel grid itself. Resampling upward interpolates new pixels and cannot recover detail; resampling downward discards pixels and can genuinely improve perceived sharpness at a smaller size.

Choosing a resolution for a viewing distance

  • Close reading, such as a photo book or a document: around 300 PPI.
  • A poster viewed from a metre or more: 150 PPI is often enough.
  • A large banner viewed across a room: 75–100 PPI can look acceptable.
  • Screens: PPI is not the deciding factor. Use CSS pixels and account for high-density displays by exporting 2× when the layout needs it.

Preparing a file for print

  • Ask the printer for the required pixel dimensions, not only a DPI number.
  • Crop to the target aspect ratio before resizing, so the composition is fixed before pixels change.
  • Resize to the exact pixel grid and keep the original as the master.
  • Choose a format: JPEG at high quality for photographs, PNG or TIFF for graphics if the print service accepts them.
  • Check colour expectations. Browser tools work in sRGB; a print service may expect a specific CMYK profile, which is a separate conversion step.

Screen pixels are a different question

On screen, the browser lays out in CSS pixels and the device may draw them with 2 or 3 physical pixels each. A 1200-pixel image in a 1200-pixel slot is sharp on a standard display and may look soft on a high-density one, where a 2400-pixel export helps. That is a display decision, not a print-density decision.

Frequently asked questions

Does increasing DPI make a photo sharper?

No. DPI is metadata describing density. The pixel grid stays the same, so no new detail appears. Sharpening and resampling are separate operations.

How many pixels do I need for a 6 × 4 inch print?

At 300 PPI, multiply inches by PPI: 1800 × 1200 pixels. At 150 PPI the same print needs 900 × 600 pixels.

Is 72 DPI bad for print?

The number alone says nothing. A 3000-pixel image at 72 PPI describes a 41-inch print; whether that is acceptable depends on viewing distance and the printer's requirements, not the label.

Can I print a screenshot?

Yes, at the size its pixels support. Screenshots are typically 72–96 PPI by design but can be printed at 300 PPI if enough pixels exist for the physical size.

Tools for this guide

Sources and verification

File-size and geometry examples are explained separately from measured exports. Platform rules apply only to the linked service and can change. Report a correction through the publisher's contact page.